Painted Bad Cat

It's Beautiful

I don't have pics, yet, but came over to the shop to see if Royce was still breathing. He is and  applying the last of the clear coat.

The car is beautiful.

Getting Pretty

Can you tell that Bad Cat looks different? This is pre-paint. The body floor panels have been knocked out and replaced, the interior body is ready, the rust pieces removed from the exterior and replaced, body putty is finally done, and sanding, sanding, sanding is in the past. Royce will be doing a few minor repairs, putting on some inner fender liners and the hood. And we have the paint, the hardener, the paint gun. The paint booth needs cleaned, but painting is happening on Saturday. All day Saturday.

We have decided thus: No more cars that require bodywork. Ever. A lesson in love, but nonetheless, never, ever, no. Not ever.

Next pics will be of a beautifully painted and shiny car body (the color is a surprise!), and deservedly so. Thank you, Bad Cat. K&R

Our Next Episode. Featured on EVTV!

'67 Mercury Cougar Renovation Rear Seat Interior

Cowl Repair And The Next Step

I finished the repair on the cowls today. I have a couple small areas beneath the rear seat that need to be replaced, so I'll do that next and then it's on to the rear quarter panels. 

 Until then, here are some pictures:

 Having coated this area with epoxy I feel confident that no water can get through. Sorry about the picture quality..

This is the outer cowl panel. I stripped off the paint, straightened some minor dents and started welding it back in place. I actually finished the welding today and ground them flush. Once they were smooth I coated the entire seam with epoxy. This should keep out all the water and dirt.

Cougar Rust Repair 101

Well, my blogging assistant has been very busy so it's up to me to make an update.

As many of you know our shop has a guardian. She is a stray calico that we took in shortly after moving to our new shop location (a little over 5 years ago) and my kids named her "Rusty." While she has many others, I'll refrain from the more colorful ones, and let you know that in her honor my new project - a1967 Mercury Cougar-   has appropriately adopted her current pseudonym, "Bad Cat."


Well, Bad Cat has some "rusty" issues as many of these late 60's pony cars have. Over the last month and a half I've replaced the floor pans and seat risers; repaired the the driver's side frame rail; replaced the driver's side torque box; installed a passenger side torque box( Ford did not originally have a passenger side torque box on the 67 Cougar or it's sister car the Mustang); and added frame rail ties. These ties are an add-on which connect the front frame rails to the rear frame rails which increases rigidity and strength.

Another problem with the design of these cars was the cowls. The cowls were basically how you got fresh air to the heater and the vents. They were prone to holding dirt and leaf litter (check the pics below ~ nothing like 40 year old nastiness). Dirt and leaf litter hold moisture and moisture causes rust. Once the cowls rusted through, the rain water ran down the dash and onto the floor pans. There it would soak into the carpet until it finally rotted through the floor pans. There are plenty of replacement parts available for Mustangs, but very few for Cougars, so it's been a challenge for me. The new cowl sections were not available but fortunately the platform is the as the Mustang so I was able to get most of the parts I needed, although they required some modification because the Cougar is 3 inches longer than the Mustang. For the cowls, however,  I decided to move into the 21st century: I cut out the rust and welded over the openings. The new fresh air inlet will come from under the hood where I can filter the air coming in. I'll replace the old heater plenum with one of my own designs using ceramic heaters for the core. It's on the agenda after the rust repair is complete.

Meanwhile, enjoy some pics.....

 Passenger torque box..

 Front frame rail with new frame rail tie...

 Driver's side torque box...

 Driver's side outer kick panel...

 Driver's side floor to firewall....

 New driver's side floor pan....

 Driver's side seat riser.....

 Driver's side torque box...

 Driver's side front frame rail repaired....

 Driver's side frame rail rust cut out....

 Old floor pans, what's left of them...

 The Original Bad Cat  keeping warm on Assistant's new coat....(Hence the name, Bad Cat)....

 New floor pans.....

 Cowls with 40 year old gunk...

 Cowls welded over.....

I'll seal these with epoxy. It will give the rain water and dirt a nice channel to follow out of the car and to the ground.